Category: Occupational safety and health administration

Your department is developing a committee to advise and inform the development of grant proposals. You have been selected as a representative. The committee chairperson has tasked the committee members to submit recommendations for technology grant proposals that will have a positive impact on safety and health within the department.

Details: For this assignment, the proposals will be evaluated based upon the quality of information provided and the proposed impact on the department. Each committee member shall submit information to support their proposal using the following points:

1. Provide an introduction as to why you selected this topic for your proposal.
2. What problem does the grant proposal solve? Provide a problem statement. (The problem is…)
3. How will this proposal directly impact safety and health within your department or organization? Be specific.
4. Provide analysis of how this grant proposal can assist with public education and code enforcement.
5. How will this proposal help reduce risk to the organization by improving risk management processes?
6. What data and research can you provide to support your proposal? Consider illness, injury, fatality, cost examples for your department. Be specific.
7. Are there any agencies that have implemented similar programs that have led to positive outcomes that you can provide as benchmarks?
8. Does this grant proposal represent an industry best practice, either now or in the future? Please provide specifics.
9. Is this grant proposal in alignment with any national or industry standards? If so, please provide specific information.
10. Please provide any additional information you deem relevant and beneficial for your grant proposal.

There is no need to provide budget information, as that will be developed if your proposal is selected based upon the quality of information youve provided.

Length: Your submission should be at least 3-pages in length, not including the title page and references.

References: A minimum of 2 references are required, 1 of which should be Scholarly/Academic in nature and found in the CSU Library. APA formatting should be used for citations and references. Use the definition to define the term in the instructions.

Definitions: Scholarly journals are sometimes called academic journals. The terms are often used interchangeably to describe the same type of publication. These types of publications are published by universities, academic institutions, professional associations, and commercial enterprises and are compiled by scholars, academics, and other subject authorities.

Submission: Save the submission as a Word document and upload the document to Blackboard.

Grading: The assignment will be reviewed in alignment to the grading rubric criteria which is focused on an understanding and analysis of the scenario, application of the relevant theories within the content, and clarity of the writing and APA citation style. The assignment is worth 30% of your course grade.

Resources

The following resource(s) may help you with this assignment.

By submitting this assignment, I verify that I am submitting an original work in accordance with the Academic Integrity Policy in the .

Instructions for Completing the MSc Safety & Risk Management Dissertation

You will be handling the project from the beginning to the end, including all data collection work. My role will simply be to follow up with you whenever there is feedback from the supervisor, so you can make the required corrections as quickly as possible.

I am currently at the Ethics stage, so you will begin from where I stopped in the Ethics Application Form. I have attached the latest comments from the supervisor, and I need you to follow these instructions very carefully. Please read the Word version of the feedback thoroughly and ensure that you include exactly what the supervisor has requested in the next submission. He has rewritten the topic, which I have highlighted in redplease rephrase the topic according to his guidance. He also instructed that I must not use my previous questionnaire; instead, I must use the Universitys NOSACQ Questionnaire, which is attached.

All other relevant documents you will need to begin are included in the attachments.

Attachments include the following:

1. Ethics Application Form SRM_23.11.2025_T(The Ethics Application Form you will work onthis is where I stopped.)
2. Ethics Application Form SRM NOSACQ Paper Completed Sample(A sample Ethics Application from the University for guidance.)
3. Last Comments from the Supervisor(You must incorporate these into the Ethics Form exactly as requested.)
4. NOSACQ Questionnaire with Information for Participants, Consent, and Privacy Notice(This is the questionnaire the supervisor wants me to use.)
5. MSc Helpful Reading List 2324, v2, 25-7-23(Project reading list.)
6. Guidance for SRM MSc Projects Ethics Applications(Official ethics application guidance.)
7. G1 A Guide to Writing Aim, Objectives, SFs, and Structuring Coursework, v6, 15-9-22(For your reference.)
8. G2 MSc Guide to Writing a Research Dissertation, v11, 22-8-23 (For your reference.)

Important Notes:

• Once the Ethics Application is approved, we will move on to writing the dissertation chapters.
• The draft submission date for the dissertation chapters is 30th April 2026.
• On page 23 of 26 in the Appendix B: Research Questionnaire, the entire questionnaire must be replaced with the Universitys NOSACQ Questionnaire (attached).

If you have any questions or need any information, please feel free to send me a message.

Thank you.

Assignment Instructions:

There are three parts to this journal. First, you will identify the most prevalent hazard at your current or former job site and the type of hazard control that you have applied or that has been applied by others to reduce the risk of your identified hazard.

Next, explain in detail what that control is, and describe where and how it fits within the hierarchy of controls (elimination, substitution, engineering, administrative, or PPE).

Finally, explain how successful or unsuccessful it is at eliminating or reducing your risk while performing the job. Give one recommendation for an additional control that could be added (anywhere within the hierarchy of control) that would further reduce risk.

Your journal submission must be at least 500 words in length. No outside sources or APA Style is required.

(1) Most prevalent hazard at former job site was excavation and trenching.

(2) The main engineering controls that were in place was the protective system for trench walls, having a competent person to identify hazards before/during work, sloping/benching, spoil and material kept back 2′ from edge of trench, access/egress by building ramps and installing barricades or snow fencing to prevent fall ins, and water control by pumping water out of trench.

(3) Additional control added to reduce risk – Administrative control Implemented by requiring an Excavation Turnover Checklist created by contractor to do an inspection of the trenches before being turned over by the sub-contractor to contractor to take ownership and maintain barricades by:

• verifying barricades installed on all four sides of excavations
• ramp installed into trench every 50′ minimum, slope no greater than 34 degrees
• All snow fence stakes have protector caps installed
• No trash or other hazards present in trench before contractor taking ownership to begin work inside trench

Implementing the Administrative control was successful by having both contractor and sub-contractor signing off on the excavation turnover checklist verifying that everything was done correctly before turnover

PAGE 1: Reflexivity asks you to examine how you your experiences, values, assumptions, and social identities shape every stage of your research project. In occupational therapy, reflexive practice strengthens clinical reasoning and supports more transparent, ethical decision-making in both practice and research. reference this link: For this discussion, you will apply reflexivity directly to your own project. Respond to all of the following: Positionality Briefly describe key aspects of yourself that may influence this project (e.g., student OT, prior clinical or volunteer experiences, personal connection to the population, cultural background, values about independence/participation, etc.). You may not have any experience or personal connection, but it’s important to state that as well. Explain one way these aspects might shape the research question, the methods you chose, or how you interpret participants experiences or data.Links to an external site. Assumptions and Biases Identify at least two assumptions or expectations you currently hold about: the population or setting you are studying, and/or what you think you will find (anticipated results). Discuss how each assumption could influence your data collection (e.g., the questions you ask, how you interact with participants) or data analysis (e.g., what you notice, what you overlook).Links to an external site. Reflexive Strategies: Describe at least two concrete strategies you will use to manage or make visible your influence on the project. Examples might include a reflexive journal, peer debriefing, returning to your positionality statement during analysis, or checking for disconfirming evidence in your data. PAGE 2: Now you will begin to apply the principles of qualitative research data collection by creating a basic interview guide and conducting a mock interview with a peer. 1. Create a qualitative interview guide with 5 questions based on your research question 2. Submit a short statement on how you addressed at least 3 ethical considerations during your interview 3. Practice interviewing a volunteer in a 5 minute mock interview. After submit the following: Describe one moment when the conversation felt stuck. What did you do, and what would you try differently next time? Identify one question that worked well and one that did not. Why? What did you notice about your nonverbal behaviors (eye contact, posture, pacing) and how might these affect an OT client? USE RESEARCH QUESTION ATTACHED BELOW

SILICA In Unit 5 Learning Resources, you were introduced to some of the regulations for the use and disposal of hazardous substances. Unit 5 Assignment involves identification of regulations for a hazardous substance or pollutant that is regulated over multiple agencies to explore interconnections between agencies and to recognize the historical background for regulations. Unit 5 Assignment is used to assess your learning related to describing historical events related to environmental health and safety to provide context for public policy decisions. Who: Individual students What: Develop a summary document for a colleague. Where: Upload your completed document to the Assignments folder for Unit 5. When: Due on the last day of Unit 5 at 11:59PM ET. Why: To practice finding related regulations for a specific topic. How: Research the various regulations for one hazardous substance or pollutant that is regulated over multiple agencies. As a reminder, an act or a statute (e.g., the Clean Water Act) is not the same as a regulation (e.g., 40 CFR Part 136, Methods for Organic Chemical Analysis of Municipal and Industrial Wastewater). Assignment Details: Select one hazardous substance or pollutant from the list below. A hyperlink to the Occupational Chemical Database from the U.S. Occupational Safety and Health Administration (OSHA) is provided to help you begin this task. Acrylonitrile Ammonia Arsenic Asbestos Benzene Carbon disulfide Lead Methylene chloride Nitrogen compounds (such as nitrates and nitrogen dioxide) that can change form and move easily between air, land, and water Silica Identify applicable regulations from OSHA and other agencies related to occupational and/or environmental health and safety for the selected hazardous substance or pollutant. Use the provided Hazardous Substance Summary Document template (attachment) to author a 1- to 2-page summary document about the selected hazardous substance or pollutant. This assignment is to practice your information gathering, literacy skills, and organization of information in a professional document. Your summary document should have at least the following sections: 1) Introduction, 2) Regulatory Overview, 3) Interconnections Between Agencies, 4) Historical Background and Public Policy, and 5) References. All these items are included in the Hazardous Substance Summary Document template. Use this assignment as an opportunity to practice writing an APA-formatted reference for each technical document you review and analyze. You do need to provide in-text citations for this assignment where requested. You do not need to submit this assignment as an APA-formatted paper. Throughout this course and program, your work will be assessed for assignment-specific items and four general criteria as described below. Context and Purpose: Unit 5 Assignment is intended to be written as a technical summary document for a novice-level colleague. Sources and Evidence: Any sources you use should be documented in APA format. In-text citations where applicable and a reference list are required. At least three references should be provided. Writing Style: Sections of the summary document should be written in your own words, with no grammar or spelling errors. Format and Layout: Submit your assignment in one compiled document (.docx or .pdf). As this is a technical summary document, the formal APA paper format is not required, but the template must be used. Review the detailed grading rubric for this assignment before beginning work on it. An example student assignment is attached to the Unit 5 announcement to help you understand expectations.

Choose any mood or psychotic disorder to answer the following questions, integrating concepts of occupational balance and health promotion: Psychology Principle and OT Application: Explain one principle of psychology (e.g., conditioning and learning, intrinsic vs. extrinsic motivation, social and emotional intelligence, developmental psychology, personality theories) in relation to your chosen disorder. How can occupational therapy (OT) use this information to promote occupational balance and influence our interactions with these individuals? Medical or Psychological Treatment and OT Integration: Explain one medical or psychological treatment for an individual with your chosen disorder (e.g., psychopharmacology, cognitive-behavioral therapy, other psychotherapies). Discuss how OT can integrate this treatment into interventions that support health promotion and manage the disorder effectively. Sociological Perspectives and Treatment Planning: Use sociology (demographics, religion/culture, location, background, stigmas, etc.) to explain how an individual with your chosen disorder might face barriers from society. How might these sociocultural factors affect your treatment plan, especially in terms of promoting occupational balance and overcoming societal barriers? Locate a local community support group, program, service or resource you could recommend to a client: In 1-2 sentences describe how this support group, program, service or resource would support your client and provide a link for others to access. Instructions for Posting: Select a mood or psychotic disorder and address the questions above in your initial post. Provide evidence or examples to support your answers (APA formatting for references and citations). Goal: The aim of this discussion is to deepen our understanding of how occupational therapists can apply principles of psychology and sociology while integrating medical or psychological treatments to enhance occupational balance and promote overall health in individuals with mood or psychotic disorders.

For the problems, be sure to use Excel and put each problem on a separate tab and label each tab

with the problem being worked. Please put parts a, b, c, etc of a problem on the same tab. Don’t

forget to highlight your “final answers” in yellow. Finally, be sure to put your last name in the

filename of the file you upload.

As the Environmental Health and Safety Manager (EHS Manager), conduct a fire prevention and protection audit of the following assembly area:

• It measures 80 feet by 140 feet.
• There are currently two 2A10B:C fire extinguishers located in the center of the room on each of the short ends (40 feet on each end of the room).
• The room hazard level is rated as ordinary with moderate amounts of Class A Combustibles and only minimal amounts of flammable/combustible materials.

Then based on the following information, provide a determination (you must show your math calculations) as to how many fire extinguishers are needed for this area and provide comments on their placement.

• Your company has several employees who are working along a conveyor line to clean up an over spill of product by manually shoveling the materials. The conveyor belt is located outdoors and will take several days to clean up. Given the following data Wet Bulb Temperature = 88oF; Dry Bulb Temperature = 93oF; and Globe Temperature = 91oF, calculate the WBGT Index. You must show your math calculations.

Due to the heat, the employees are only exposed for 190 minutes at this temperature over an 8-hour workday. Assume a 75oF exposure for the remaining 290 minutes. Provide a recommendation on the work/rest cycle based on the information and guidance in this unit. Include any assumptions in your analysis.

Finally, discuss the concept of wind chill and calculate the wind chill in oF based on the following information below. You must show your calculations.

• Air Temperature: 10oF and a Wind Speed of 12 miles per hour (mph)

Your journal may use headings to separate topics. It should be at least two pages in length. APA formatting and references are not required.

INTRODUCTION

Organizations periodically seek to establish a new line of business or improve performance of an existing one. You should understand the marketplace as well as the internal environment, and how both may impact the ultimate success of the organizations service line. Using the Service Line Development Case Study, you will assess the viability of developing one of the following new service lines:

Orthopedic center

Cardiovascular center

Cancer center

You will assume the role of a CEO in a healthcare facility. The CEO is tasked with developing a new service line. You will present the findings to the board of directors for buy-in and approval.

A. Determine the feasibility of one of the proposed service lines in the attached Service Line Development Case Study by doing the following:

1. Evaluate the demand for the new service line in the market area defined in the case study.

2. Analyze how current international healthcare trends could be incorporated into the development of the new service line.

3. Discuss the existing programs and service lines in the healthcare organization that could serve as complementary components of the new service line.

4. Analyze the financial and operating data to determine the financial feasibility of instituting the new service line.

5. Discuss how to target and market to physicians to secure referral services.

we are taking a deeper dive into source reduction and recycling. Describe your source reduction and/or recycling efforts at home, at work, or in the military. Do you see areas for increasing these?

Your journal entry must be at least 400 words in length. No references or citations are necessary.