Introduction
You will be doing a site assessment and design proposal for a wireless installation at a virtual site. This project will be done as an individual.
Case Study
The Building
A company, MyCo, has rented a two-floor office space in a commercial/industrial area measuring 132’x78′. The facility is located in Lake County, Illinois. The space is broken up into fixed wall offices and cubicles. The internal structure consists of 15′ ceilings, with a suspended ceiling dropping down to 12′ leaving a 3′ plenum above the suspension system. We have Armstrong Cortega Second Look tiles in an Armstrong Prelude XL Fireguard system. The tiles are wet-formed mineral fiber with an insulation R-factor of 1.6 and an energy absorption of 0.28 watts/sqm. The grid uses a 15/16 T-rail suspended from the support structure at 4 increments. It can support 42lbs in its current configuration per 4 segment after taking into consideration the tile and structure weight. The T-rail is recessed 1/4 into the tile.
The cubicles are selected from the Allsteel Concensys system. They are a combination of steel frames, laminate and composite horizontal surfaces and fabric covered vertical surfaces. There are small 2×2 whiteboards in use throughout the cubical areas. These are aluminum backed board with a laminate coating.
The plenum space contains a combination of flexible and non-flexible ductwork as well as a sprinkler system. It is an active plenum so all components installed in this space need to be plenum-rated. Fluorescent tube lighting fixtures are situated in regular patterns throughout the space. Ceiling tiles are replaced with 2×4 fixtures leveraging electronic ballasts fed with 240vac power.
Exterior-facing windows and doors meet energy star requirements for this area. They take advantage of low-e glass, triple pane with argon fills. Interior glass is not filmed but is tempered per local building code. Interior doors are hollow core with no metal reinforcement. The interior walls are constructed using type-C gypsum board. They are fixed to steel studs 16 on-center. Window and door casings interior to the building are painted steel.
Floors are constructed of pre-cast/pre-stressed flexicore concrete panels. The concrete panels are 12 thick.
Functional Requirements
The staff require wireless service throughout the building, but special care must be taken to cover the meeting and break rooms as these are concentrated areas of mobile users. The staff request no less than 802.11ac wave 2 infrastructure be installed. Many users will likely give up their wired connections and leverage the convenience of the new wireless network, so planning for capacity and density over simply coverage would be advantageous. You will have to carefully balance the coverage and AP density dynamics. There are currently 185 users within the space at any given time. We expect this to grow to roughly 250 users within three years. Each user can be assumed to have 2.2 devices, a mix of corporate and BYOD (e.g., company-issued laptop, personal phone and many will have another device).
Deliverables
You will need to provide markups of the provided drawing to show AP placement and coverage, channel designations on a per-AP basis, etc. Furthermore, all equipment used (APs, antennas, cables, controllers etc.) will need to be documented as a total solution to the sites request. All of this information must be included in a single cohesive document. It must be delivered electronically in a format of your choosing via the Sakai assignment tool. All deliverables must be provided no later than 11pm CDT on Thursday, April 9, 2025.
Grading
Grading will be as follows:
50pts – Floor one layout, including channels (2.4GHz, 5GHz, and 6GHz if appropriate)
50pts – Floor two layout, including channels (2.4GHz, 5GHz, and 6GHz if appropriate)
50pts – Hardware selections (APs, antennas, cables, controllers, etc.)
150pts total
Author: admin
-
Project 3 – 349
-
Psychology Question
I will send you all resources given to me
-
Management Question
1st assignment for MGMT828 class ( I will attached some assignment for the consultant/organization that I have been done. I also attached the suggest that the professor for this class include to add in this assignment please remember to to used textbook and external sources meaning outside sources the link is username santayna.folkes Password Ilovemygod77
Primary Task Response: Within the Discussion Board area, write 400-600 words that respond to the following questions with your thoughts, ideas, and comments. This will be the foundation for future discussions by your classmates. Be substantive and clear, and use examples to reinforce your ideas.
Delivering feedback to the client is only one aspect of the feedback process. The consultant must also be willing to ask for and receive feedback. In your Discussion Board (DB) posting, address the following:
Reflect and identify when you have consciously asked for feedback from your client.
Tell your classmates about how and when you asked, describe the clients response, and share your reaction to the feedback.
If you have not yet asked for feedback, explain why. Also, identify when you will do so and how you will ask.2nd assignment for LDR874 class please remember textbook sources and external sources es meaning outside source link same username santayna.folkes and password Ilovemygod77
Primary Task Response: Within the Discussion Board area, write 400-600 words that respond to the following questions with your thoughts, ideas, and comments. This will be the foundation for future discussions by your classmates. Be substantive and clear, and use examples to reinforce your ideas.
Critically review the following:
How can reward systems be designed for team or group projects and still recognize individual effort?3rd assignment for the LDR874 class please remember textbook sources and external sources es meaning outside source link same username santayna.folkes and password Ilovemygod77
Primary Task Response: Within the Discussion Board area, write 400-600 words that respond to the following questions with your thoughts, ideas, and comments. This will be the foundation for future discussions by your classmates. Be substantive and clear, and use examples to reinforce your ideas.
With the expanding global business platform, managers are facing the challenge of how to lead in a global economy. Large companies have manufacturing, marketing, and sales in multiple countries. Discuss the following:
Relate the increasing new role of labor laws in Africa, China, and India with which an American manager must be ready to contend. -
Circuits questions
please do the questions attached in a word file
-
Caledon Concrete Mixers
attached below is the case as well as the instructions please do not use AI and complete it as instructed
-
Computer Science Question
AI policy for this assignment:
Using your preferred Generative AI tool (ChatGPT, CoPilot, Meta AI, etc.), summarize the provided PDF article What Role Should Business Play in Society? (Mazzucato, 2022). Challenge the AI tool to provide additional analysis on at least three of the findings using two of your own drill-down prompt questions per finding. In other words, your final report should include analysis on at least three of the report summary findings with at least two AI prompts per finding that generate additional insights. Finally, write your own final paragraph indicating which of the authors suggestions from the article you agree or disagree with and why.
Step-by-step instructions:
- Using ChatGPT or similar tool, upload the provided PDF article for analysis. Prompt ChatGPT with a direction such as Please summarize the most important points from the attached article. Students are encouraged to use their own variations for this and other prompts.
- Once the results are presented, choose at least three of the articles findings and ask the AI tool to provide further analysis using at least two of your own prompts per finding. There should be at least 7 different prompts used during this process (the initial, and two additional unique prompts per finding after the initial). Make sure to include the prompt questions or directions you used in your final paper and highlight each prompt question in yellow.
- To practice good sourcing that leads to credible findings and analysis, make sure to request that the AI tool provide all references in APA format and include those citations in your paper.
- Asking for sources/references alone will not be considered as further analysis and/or a valid standalone prompt: your questions need to ask for an analysis and/or include more detail in your ask–you should provide more than just a reference list.
- Based on the results provided by your AI tool, write your own final paragraph consisting of a minimum of 100 words indicating which of the authors suggestions from the article you personally agree or disagree with and why. This paragraph should be written from your point of view and not just from AI output.
- Your final project should look more like a movie script and less like a typical paper.
- The entire conversation with AI should be uploaded.
- Be sure to list which AI platform you used.
- Upload your final paper in PDF or Microsoft Word file format in Brightspace.
Grading Rubric
Plan Section
Completion Available Points
AI Prompts
10 Initial AI prompt and two unique subsequent follow-up AI prompts for at least three of the reports summary findings are relevant and included.
5- Two summary findings are explored and/or less than two follow-up AI prompts are included; OR some provided prompts are not relevant to the select summary findings.
0 Missing AI prompts or prompts that are completely unrelated to the articles key points.
Personal Perspective Paragraph
10 Summary perspective was shared via a minimum 100-word paragraph with personal opinions/insights provided by the student.
5- Summary perspective was shared but unrelated to the insights provided by the article or AI analysis, OR less than 100-word minimum.
0 Missing personal perspective paragraph or paragraph missing a personal perspective.
APA References
10 APA citations provided when third-party source were referenced.
5- Some missing APA citations.
0 No APA citations provided.
AI & The Writing Center: The Online Writing Center is committed to helping students become better writers. While we are aware of AIs use in the writing process, we want to be clear that we will not provide certain types of feedback on content clearly generated by AI. In situations where this is required for an assignment, we will only review an AI-generated essay for documentation (APA, MLA, or Chicago). Students are encouraged to submit their own writing, no matter how rough the draft, instead of drafts generated by AI or Large Language Model. Students must engage actively in the writing process before seeking feedback.
Assignment Details
Unit 7 – Discussion Board (75 points)
Due: Thu, Apr 2 |
Description
Primary Response is due by Thursday (11:59:59pm Central), Peer Responses are due by Saturday (11:59:59pm Central).
Primary Response: Within the Discussion Board area, write 500700 words that respond to the following questions with your thoughts, ideas, and comments. This will be the foundation for future discussions by your classmates. Be substantive and clear, and use examples to reinforce your ideas.
For this Discussion Board, please complete the following:
Business intelligence (BI) refers to a set of best business practices and software tools to support business decision making under fast changing competitions and growing globalization. The earliest generation of BI systems is called the decision support system (DSS), which consists of a data warehouse system and often an online analytical processing (OLAP) system.
Study the relevant content in the course materials and investigate the Library and Internet for information about the DSS, data warehouse, and OLAP. Then, based on the results of your research, discuss the main difference between a data warehouse system and an OLAP system in the following aspects:
- Suitable applications
- System architecture
- System functions
Determine why a DSS needs both a data warehouse system and OLAP system. In addition, evaluate why a DSS has evolved further in recent years to include more advanced tools in addition to data warehouses and OLAP.
Responses to Other Students:
Respond to at least 2 of your fellow classmates with at least a 200-word reply about their Primary Task Response regarding items you found to be compelling and enlightening. To help you with your discussion, please consider the following questions:
- How would you justify a different perspective from your classmates on the topic?
- How, additionally, would you defend your classmates position?
- What critique do you offer your classmate in regard to clarity and thoroughness of their post?
- Please address all prompts. When offering counterargument or justification, consider practice, theory, and examples from your own experience, reading, or current events in presenting your position.
For assistance with your assignment, please use your textbook, all course resources, and any external research and resources you have gathered.
Discussion Board Rubric
Expectation
Points Possible
Points Earned
Comments
Application of Learning Material Content: Initial post demonstrates understanding of Learning Material content.
25
Application of Course Knowledge: Initial post contributes unique perspectives or insights gleaned from text/learning resources, or specified by assignment.
25
DB Responses: Responds substantively to two posts. Responses encourage interaction in the Discussion Board and classroom community.
10
Academic Writing: Initial post presents information logically and is clearly relevant to discussion topic. Posts contain accurate grammar, spelling, and/or punctuation with few or no errors. All resources should be cited in current APA format.
15
Total Points
75
Total Points Earned
Assignment Details
Unit 7 – Individual Project (125 points)
Due: Sun, Apr 5 |
Description
Assignment Details:
Supervised learning and unsupervised learning are two machine learning methods that have both been applied by data mining techniques. Study the relevant content in the course materials and investigate the Library and Internet for information about both machine learning methods. Then, based on the results of your research, discuss the following aspects:
- What are 2 or 3 applications suited to each method?
- In your opinion, what is the most important issue related to each method?
- Propose how to address the issues.
Individual Project Rubric
The Individual Project (IP) Grading Rubric is a scoring tool that represents the performance expectations for the IP. This Individual Project Grading Rubric is divided into components that provide a clear description of what should be included within each component of the IP. Its the roadmap that can help you in the development of your IP.
Expectation
Points Possible
Points Earned
Comments
Student provides at least 2 applications suited to supervised and unsupervised learning.
30
Student provides their opinion on the most important issue related to each method.
30
Student provides how to address the issues.
30
Paper contains at least 5 references.
10
Professional Language: Assignment contains accurate grammar, spelling, and/or punctuation with few or no errors. (APA formatting is required or style specified in assignment).
25
Total Points
125
Total Points Earned
-
Psychology Question
I will send all resources to complete this assignment
-
Circuits questions
Please do the questions in a word file
See attached
-
Nursing Question
With your Research Partner use the feedback you received from faculty and classmates on your PICOT drafts to create your final PICOT question. Use the grading rubric as a guide in creating the final PICOT and provide information about the type of PICOT question, background information, and discussion of the most interesting foreground studies being conducted in the past 5 years. Use the textbox to submit the final version of your PICOT question and supporting information (this is your answers and citations to the requested information in your clinicial scenario). Use APA for reference list and in text citation.
You will receive feedback on the final PICOT you submit, and faculty approval on the exact wording of the Final PICOT to be used in future assignments.